Radio Frequency Treatment  Loading... Please wait...

Our Newsletter

SE-EM062 Manual


Click to view: SE-EM062 Multifunction Microdermabrasion Facial Treatment Machine


Download Manual







se-em062 diamond microdermabrasion tips

pores, aging spots, pigment irregularities, stretch marks, sun damage, wrinkles, etc


 se-em062 bio microcurrent facial probes

Promote collagen, lift face, firming and toning, improve oily skin, smooth roughness, remove wrinkle and fine lines, pores



se-em062 microcurrent photon light treatment head

Acne, allergy, inflammation, sagging, pigmentation, oily, sunburn, aging, etc

se-em062 ultrasound facial treatment probes 

reduce fine lines, wrinkles, sagging, clear up acne, dissolve cellulite, shrink pores, tighten skin, etc

se-em062 ultrasound scrubber

clear impurify, blackhead, cuticle, tighten skin, lift face, remove wrinkle


se-em062 hot and cold facial massage hammer

improve facial blood circulation, release pain, smooth wrinkle, tighten pores

se-em062 negative electrode wand 

should be grasped by client during the treatment of ultrasound and scrubber



Control Panel

se-em062 multifunction microdermabrasion machine control panel 


Functions and Configuration

Before you start using the machine, please connect the hand pieces that you are going to use(or just connect all of them). Connect the power cord to the power supply and press the mother switch at the back. The machine will be powered and the displayer on the panel is indicating.

 1.      Diamond Microdermabrasion Peel

Connect the vacuum hose to the wand and diamond tips. Press (7) and the motor start working. Turn (17) knob up/down to adjust the vacuum suction strength.



 se-em062 diamond microdermabrasion treatment operation chart

Treatment Schedule Suggestion

-Roughness Peel: 6-10days/treatment, total 3-5 treatments

-Fine Lines: 7-13days/treatment, total 6-8 treatments

-Sagging Neck: 12-14days/treatment, total 3-5 treatments

-Acne Scars: 7-12days/treatment, total 8-10 treatments

-Hyperpigmentation: 7-12days/treatment, total 8-10 treatments


2.      Ultrasound Facial Massager and Scrubber

Connect the ultrasound facial massage probe(either the face probe or eye probe whichever you use) to the ULT inlet and the scrubber to the SCR inlet in the (12). And also connect the tiny electrode wand to (11). The client should grasp the electrode wand although the ultrasound facial/scrubber process. If you want to use ultrasound probe(for face), insert the face probe to ULT inlet in (12), select a treatment time at (1) and the ultrasound wave intensity in (2), press button (3) to A, press button (5) to ULT, finally press button (6) to start working. You can also press button (4) to change the ultrasound waveform. The right side waveform is recommended for treatment purpose and the left side waveform is recommended for maintenance purpose.


If you want to use the other ultrasound probe(for eye), remove the face probe and insert the eye probe to the ULT inlet in (12), press button (3) to B and press button (6) to start working—button (5) should be selected to ULT.


If you want to use the Scrubber, press button (5) to SCR and repeat the other operations as same as the ultrasound probe.


se-em062 ultrasound facial treatment operation chart         


3.      Hot & Cold Massage Hammer

Connect the Hot&Cold Hammer to (13) inlet, press button (8) and the fan in the hammer is working. Press the switch on the hammer and both the Hot side and Cold side start to work.

4.      Photon Light Therapy(with microcurrent)

Connect the Photon Head to (14) inlet. Press button “MODE/ON” on the Photon Head, then it starts lighting. Press this button again to change another light colors. Press button “WAVE” to select constant or interval lighting. If you press button “AUTO”, the lights will come out in turn(in AUTO mode, the button “WAVE” will stop working). Press button “AUTO” again to stop automatically lighting. Press button “OFF” to stop once you finish.


The Photon Head including microcurrent electrodes to improve facelift. Press button (9) to turn on/off and turn up/down the photon microcurrent energy.


You are allowed to use the photon lights without enable the microcurrent. You are also allowed to use the microcurrent without enable the photon lights.


-Colors, Penetration Levels(Min 1 to Max 6), Applications:

(1)Red(penetration level 6): Vitalize be suitable for any skin, promote blood circulation, and regenarate collagen protein in order to smooth skin and heal xerodermia, exuviation, degenerate losing hair and folliculosis
(2)Blue(penetration level 2): Calm be suitable for sensitive, oil, and comedo skin—diminish and eliminate acne bacilus to remove acne, whelk, promote to compound protein with ossein, activate skin, tighten slack skin and gravidity winkle
(3)Green(penetration level 4):Balance Normalize sebaceous glands ,Reduce black heads and sores, balance moisture
(4)Purple(penetration level 1): Drain Renew skin, reduce wrinkles
(5)Orange(penetration level 5): Brighten whiten decompose pigment, and smooth scares
(6)Turquoise(penetration level 3): Defense strengthen the ability to protect skin, calm down, release stress, cure sunburn
(7)White(penetration level 1-6 combine): Guide guide skin to absorb nutrients and anti-aging

5.      BIO Microcurrent Facials

There are 3 groups of BIO probes. Select the right one that most fits your treatment purpose. Inset it to (15) inlet. Press button (6) to start the machine and then turn up/down the knob at (10) to adjust the microcurrent intensity.


-The Mushroom probe is for lager area such as cheeks, forehead, neck, etc

-The Rod probes are for smooth targets such as cheeks, forehead, neck, chin, etc

-The 2-prong probe is for full-face area


 se-em062 how to use bio lift probes

This BIO probe can be used without adding the cotton swab but we recommend you add it because it would obviously increase the microcurrent conduction and the nutrition absorption. It will be the best if you can use cotton swab of paper axis. It is common and easy to find in make up shop or supermarket as personal care items. Soak the swab completely in water (EXCEPT pure water) for a few minutes before you use it.



Technical Parameters
-Voltage: 110V/60Hz, 220V/50Hz
-Power: 140W

Free xml sitemap generator